MK-2 85:1 Grease Pump

The Mk2 85:1 grease pump has been specifically developed for greasing applications where a very high pressure is needed or where long piping lines with various take off points are required.

Description

The Mk2 85:1 grease pump has been specifically developed for greasing applications where a very high pressure is needed or where long piping lines with various take off points are required. The cylinder, body and Piston of the pump are Anodized for Longevity. This pump is manufactured for a 50kg & 180kg drum. The follower plate can be fitted with a spring for stiff greases.

This Pump can be fitted with Teflon and Viton Seals where the pump is needed for continuous
use at high temperatures.

TECHNICAL DATA

– Fluid Pressure Ratio: 85:1
– Size of Outlet: ¼”NPS
– Delivery Volume: 1.9kg/min based on 8 Bar Regulated input pressure using Lithium EP 2.
– Pressure Output: 700 Bar based on 8 Bar Regulated input pressure using Lithium EP 2.

The Technical Data was derived by pumping Lithium EP 2 Grease through a 50kg Pump Tube, 2m 1/4” Hydraulic Hose and Rigid Grease Control Handle with a German Precision 4-Jaw Coupler.

The Air Input was regulated at 8 Bar using the Parker Global Air Preparation System Filter/Regulator combination. The 8 Bar input pressure ran the pump at 150 cycles per minute.

Wetted parts: Steel; brass; aluminum, Nitrile, Teflon, Polyurethane.

 

download-data-sheet

Product Enquiry

[recaptcha]